Fall Chimney and Fireplace Checklist for Pacific Northwest Homes

Short answer: before your first fire of the season, schedule a chimney inspection and cleaning, check the damper and cap, test smoke and carbon monoxide alarms, and make sure you are burning dry, seasoned wood. In the Seattle area, try to book between late spring and early fall, before the rainy season and before sweeps' schedules fill up.

Book the professional work first

  • Inspection and cleaning: a yearly chimney cleaning and inspection removes creosote and catches damage early.
  • Exterior check: crown, cap, flashing and masonry. Repairs are easier before the heavy rains.
  • Gas fireplaces: a gas fireplace inspection for the venting, pilot, burner and glass.
  • Seasonal prep: see our seasonal chimney preparation service.

Homeowner checklist

  • Open the damper and make sure it moves freely and seals when closed.
  • Look up the flue with a flashlight for nests, leaves or debris.
  • From the ground, check that the chimney cap is in place and the bricks look intact.
  • Test smoke and carbon monoxide alarms on every floor and replace batteries.
  • Keep a fire extinguisher near the fireplace.
  • Clear the hearth area of furniture, rugs and decorations that could catch a spark.
  • Inspect the fireplace doors or screen and replace damaged gaskets.

Firewood: the most overlooked step

Wet wood is the main reason chimneys build creosote fast in the Northwest. Firewood should be split, stacked off the ground, covered on top and left open on the sides so air can move through it. Most wood needs six to twelve months to dry. Seasoned wood is lighter, has cracks on the ends and makes a hollow sound when two pieces are knocked together.

During the season

  • Build smaller, hotter fires instead of letting a big fire smolder overnight.
  • Never burn trash, cardboard, wrapping paper or treated wood.
  • Put ashes in a metal container with a lid, outside and away from the house.
  • If you notice smoke in the room, a strong smell or a rumbling sound in the chimney, stop using the fireplace and call us.

Talk to a local chimney expert

Book your fall inspection early. September and October are the busiest months of the year for chimney work in Seattle. Call Chimney 360 Services at (206) 618-2443 or request a free estimate online. We serve Seattle and the surrounding Eastside, South King County and Snohomish County communities.

Frequently Asked Questions

When should I get my chimney ready for winter in Seattle?

Ideally between late spring and early fall, before the first fires and the start of the heavy rain season. September and October are the busiest months for chimney sweeps.

What should I check before the first fire of the season?

Open the damper and look for light at the top, look for debris or nests, test smoke and carbon monoxide alarms, make sure the cap is in place and that you have dry firewood.

How should firewood be stored?

Split, stacked off the ground, covered on top and open on the sides, and kept away from the house walls. Most wood needs six to twelve months to dry.

Do I need a chimney inspection if I had one last year?

Yes. NFPA 211 recommends an inspection every year, because conditions change from season to season, especially with Seattle's rain.

Previous
Previous

9 Signs Your Chimney Needs Repair (Before It Gets Expensive)