Short answer: creosote is a flammable residue that forms when wood smoke cools as it rises through the chimney. It builds up in three stages, from loose soot to a hard, shiny glaze. Light buildup is removed with a normal sweep. Thick or glazed creosote is a real fire risk and should be removed before you light another fire.
How creosote forms
Smoke carries unburned particles, water vapor and gases. When it hits the cooler walls of the flue, those condense and stick. The cooler and smokier the fire, the faster creosote builds. That is why damp wood, smoldering fires, closed-down air controls and oversized or exterior chimneys all make it worse.
The three stages of creosote
- Stage 1: soot. Dry, black and flaky. Easily removed with brushes during a routine chimney cleaning.
- Stage 2: crunchy flakes. Black, tar-like flakes that are harder to remove. Common in wood stoves and inserts that are run at low burn.
- Stage 3: glazed creosote. A hard, shiny coating that looks like dripping tar. It is very flammable and difficult to remove. It needs specialized creosote removal.
Warning signs to watch for
- A strong smoky or asphalt-like smell from the fireplace, especially in humid weather.
- Poor draft: fires that are hard to light, or smoke rolling into the room.
- Black, puffy or shiny deposits on the damper and the top of the firebox.
- Flakes of creosote falling into the firebox.
- Signs of a past chimney fire: a loud rumbling or roaring sound, dense smoke from the top of the chimney, or later, warped metal and cracked flue tiles found during an inspection.
How to slow creosote buildup
- Burn only dry, seasoned hardwood or well-dried softwood. Wood should sit split and covered for six to twelve months.
- Build hotter, smaller fires instead of large smoldering ones.
- Do not close the air supply all the way to make a fire last overnight.
- Never burn trash, cardboard, treated lumber or wrapping paper.
- Book a yearly inspection and clean whenever buildup is found.
Had a chimney fire, or think you might have?
Stop using the fireplace and schedule a Level 2 inspection. Chimney fires can crack clay liners and damage the smoke chamber without any visible sign from inside the room. Using a damaged chimney again can let heat and gases reach the framing of the house.
Talk to a local chimney expert
If you see shiny, tar-like deposits, do not light another fire until the chimney has been checked. Call Chimney 360 Services at (206) 618-2443 or request a free estimate online. We serve Seattle and the surrounding Eastside, South King County and Snohomish County communities.
Frequently Asked Questions
What does creosote look like?
It ranges from a black, flaky soot (first stage), to crunchy, tar-like flakes (second stage), to a hard, shiny glaze that looks like dried tar on the flue walls (third stage).
Can creosote cause a chimney fire?
Yes. Creosote is flammable, and thick or glazed creosote is the main fuel for chimney fires. Many chimney fires go unnoticed but still crack flue tiles and damage the liner.
Can I remove creosote myself with a creosote log?
Creosote sweeping logs can loosen light deposits between cleanings, but they do not replace a professional cleaning and inspection, and they do not remove glazed creosote.
How do you remove glazed creosote?
Third-stage glaze usually needs specialized tools or a chemical treatment that converts the glaze into a material that can be brushed out. In severe cases, a damaged liner has to be replaced.